French medtech · Made in France
Nasal conformers and surgical simulators.
Medical devices and training models co-developed with surgeons and physicians, from clinical needs to production.
Clinical design · Made in France · RHINO usually dispatched within 24–48 hours
Observe or practise: anatomical models are for observation, not surgical practice; simulators support the procedures specified for each model.
RHINO size guideAlready used by healthcare institutions
Our solutions are already used across France and Europe.












Trademarks are shown solely to identify the institutions concerned.
Nasal conformers · RHINO family
Conformers suited to each patient’s anatomy.
The RHINO family includes BB-RHINO, available in 14 paediatric sizes, and AD-RHINO, available in 5 adult sizes.


What is it used for?
RHINO nasal conformers support the nasal septum and alae after surgery. They help stabilise the tissues, while the support plate at the philtrum protects the healing area.
Dispatch within 24–48 hours
BB-RHINO and AD-RHINO nasal conformers are Class I medical devices manufactured by BONE 3D Group SAS. They are non-sterile, single-use devices for a single patient, with a maximum duration of use of 30 days. Size selection and use must follow the prescription and instructions for use. These regulated medical devices bear the CE marking under the applicable regulations. Last updated: 8 October 2026.
Main indications
- Cleft lip and palate
- Rhinoplasty and reconstruction
- Choanal atresia
- Pyriform aperture stenosis
Restricted access
Information for healthcare professionals
French hospital billing information, documentation and guidance on using the RHINO family.
Access the professional area →Made in France
Two controlled stages
3D-printed moulds, followed by manual injection of biocompatible silicone.
Guided use
Safe use
Non-sterile, single-use product for a single patient. Follow the prescription and instructions for use.
Clinical design
Developed with surgeons
The range was developed with AP-HP, Université Paris Descartes and Hôpital Necker–Enfants malades.
View dimensions for all 19 standard sizes
BB-RHINO · 14 paediatric sizes
| Size | N (mm) | W (mm) | L (mm) |
|---|---|---|---|
| 1 | 6.4 | 8.3 | 17.8 |
| 2 | 6.7 | 8.7 | 18.3 |
| 3 | 7.0 | 9.0 | 18.8 |
| 4 | 7.5 | 9.8 | 20.4 |
| 5 | 8.0 | 10.6 | 22.0 |
| 6 | 8.5 | 11.4 | 23.5 |
| 7 | 9.0 | 12.2 | 25.0 |
| 8 | 9.5 | 13.0 | 26.5 |
| 9 | 10.0 | 13.8 | 28.0 |
| 10 | 10.5 | 14.5 | 30.5 |
| 11 | 11.0 | 15.3 | 33.0 |
| 12 | 11.8 | 16.0 | 36.0 |
| 13 | 12.5 | 16.7 | 37.0 |
| 14 | 13.2 | 17.4 | 38.0 |
AD-RHINO · 5 adult sizes
| Size | N (mm) | W (mm) | L (mm) |
|---|---|---|---|
| 1 | 14.0 | 18.1 | 40.0 |
| 2 | 15.0 | 20.1 | 42.0 |
| 3 | 16.0 | 21.5 | 45.0 |
| 4 | 17.0 | 21.8 | 47.0 |
| 5 | 17.6 | 22.5 | 49.0 |
Dimensions help guide selection. The prescription and sizing gauge remain essential.
Measurement guide

W: distance between the nostrils

A patient-specific solution can be considered on request if none of the standard sizes is suitable.
Simulation and anatomy
Observe anatomy. Practise the procedure.
Explore surgical simulators, anatomical models for observation, and models for clinical skills training.
Surgical simulators
Operable models for practising the procedures supported by each range.
Maxillofacial surgery
Maxillo-Train
A surgical simulator dedicated to orthognathic surgery training.
Explore the rangeDental surgery
BUCCO-Train
Models dedicated to implantology, bone grafting and sinus lift procedures, with training supports and replacement inserts.
Explore the modelsVascular and endovascular surgery
ILIO-Train
A lower-limb vascular network for catheterisation and thrombus aspiration training.
Explore the rangeEndonasal pituitary surgery
NASO-Train
Three pathological anatomies for training in endoscopic endonasal surgery, from the surgical approach to resection.
Explore the rangeNeurosurgery
Intracranial access
Training in intracranial access, sensor placement and ventricular puncture using dedicated cartridges.
Explore the rangePedicle screws and TLIF fusion
Lumbar spine surgery
Surgical simulators for pedicle screw placement and the various stages of transforaminal lumbar interbody fusion (TLIF).
Explore the rangeAnatomical models
Models for observing, understanding and explaining anatomical structures, not for surgical practice.
Anatomy and women’s health
Vulvar anatomical models
Models for observation and explanation of vulvar anatomy, supporting dialogue with women affected by female genital mutilation.
Explore the rangeDental and maxillofacial anatomy
Mandibular anatomical model
A complete mandible for visualising anatomy and explaining a condition or treatment.
Explore the rangeLumbar anatomy
L3–L4–L5 spine teaching model
An anatomical model for observing the lumbar vertebrae and their relationships with neighbouring structures.
Explore the rangeTeaching and explaining anatomy
Custom anatomical models
Lung, bronchi, liver, brain or skull: physical models for showing and explaining anatomical structures.
Explore the rangeClinical skills training
PODO-Train and care simulation
Explore dedicated pages for podiatry, nasopharyngeal swabbing, nasal packing and stoma care.
We turn a specific clinical need into a model tailored to the procedure, tissues and learning objectives. Discuss your project →
Why BONE 3D
Clinical practice guides every technical choice.
We work with clinicians to design, validate and produce solutions suited to real-world use.
Source: internal BONE 3D sales and production data, consolidated on 8 October 2026.
- 1
Understand the need
Indication, procedure and success criteria.
- 2
Design and validate
Anatomy, materials and testing with clinicians.
- 3
Manufacture and support
Manufacturing, quality checks and ongoing support for the team.
About us
Engineering in the service of care.
BONE 3D combines scientific expertise, 3D printing and close collaboration with clinicians to develop practical medical solutions.

Founder & President
Jérémy Adam
With a PhD in biomechanics, Jérémy leads the design and development of BONE 3D solutions.
LinkedIn profile
Managing Director
Sylvie Delassus
With a doctorate in science, Sylvie leads BONE 3D’s strategy, communications and business development.
LinkedIn profileFrequently asked questions
A few answers before you get in touch.
How do I choose the size of a RHINO conformer? +
The sizing gauge helps healthcare professionals choose between BB-RHINO and AD-RHINO sizes. Our team can also provide support based on the clinical context.
Is the conformer sterile? +
RHINO conformers are supplied non-sterile, for single use by a single patient. The maximum duration of use is 30 days. Full details are provided in the instructions for use.
Can a simulator be adapted to our training programme? +
Yes. We can adapt the anatomy, procedure, consumables and level of realism to your training protocol.
Do you ship outside France? +
Yes, depending on the product and destination country. Please include your institution and country in the form so that we can provide a specific answer.
Contact
Tell us what you need.
We will help you find the right product, documentation or technical contact.









